How To Clean A 22 Without A Kit

Download Article

Download Commodity

Cleaning a revolver is a necessary function of gun ownership. Keeping your firearm clean improves accurateness, ensures it fires when needed, and maintains its value. You tin either put together your own cleaning kit or purchase one from your local gun shop.

Steps Download Article

1. one

   Make certain the gun is unloaded. With the gun pointed in a safe direction and with your finger off the trigger, concur the gun past the grip. Using your pollex, push the cylinder release to open information technology upward. With your other hand, reach over the top of the gun and push the cylinder out. Check to see that there are no cartridges in the cylinder or the sleeping accommodation. Push out and ready aside whatever bullets.^[1]

2. 2

   Lay the gun and supplies on a workspace with a clean, lint-complimentary coating. Keep all of your supplies close by. You lot don't want to be walking around, dirtying your easily, or constantly pick upward new things that may bring unwanted dirty near your gun. Wash and dry out your hands once you have everything ready to piece of work.

   • If you've never cleaned a revolver, bank check out this listing of necessary cleaning supplies.
   • You can also purchase pre-made cleaning sets at most gun stores, commonly for around $50.^[ii]

   Advertisement

3. 3

   (optional) Cover up the rear cylinder opening with a sock. The rear cylinder is the role above the trigger, where the hammer hits the sleeping accommodation to fire a shot. Wrap an erstwhile, long sock effectually this opening to prevent cleaning brushes from getting in and ruining the revolver.

4. four

   Dip the correct size diameter castor into your cleaning solvent. Bronze bristle brushes are less aggressive and are fine for removing powder residue. Steel brushes are more than aggressive and can habiliment on the barrel, but may exist useful in situations with old, caked-on, and hard deposits. Stick with bronze unless you lot have a reason to utilize steel. Nylon brushes are also available, simply bronze is a skillful compromise in almost cases.^[3]

   • If you are shooting jacketed bullets, you lot will accept some copper-colored gilding metal in the bore. To remove copper (gilding metal), yous will demand to utilize a solvent designed to remove copper. Your gun dealer tin guide you in selecting this. Copper solvent volition eventually dissolve the bronze bristles on your brush. In that case, y'all can use a steel brush (sparingly) or a nylon brush while you are using copper solvents.
   • If y'all are shooting non-jacketed bullets, you may have atomic number 82 in the bore. Your gun dealer can guide you in selecting a product to assistance remove atomic number 82.^[4]

5. 5

   Slide the castor into the barrel, letting it twist naturally with the gun. Revolvers are twisted inside, which spins the bullet for greater accurateness. Y'all want to follow these grooves naturally with the brush to clean deep inside of them. Push all the mode through the barrel, then pull the castor dorsum through the other fashion. ^[5]

   • Go on the brush in the center of the butt, only applying low-cal pressure.^[6]
   • Sometimes bore brushes are simply chosen wire brushes.
   • Give the revolver a minute to soak if the rifle is actress muddied.

6. 6

   Remove the brush and attach a clean lubricated patch to the patch tip. After the bore brush, get out your cleaning rod and adhere a clean patch. If information technology isn't lubricated, dip it in cleaning solvent and run information technology through the barrel gently. If it comes out very dirty, get a new patch and repeat.

7. seven

   Use 2-3 dry cleaning patches to dry out the barrel and remove whatever concluding grime. Once you've finished with the solvent, get as much out of the barrel equally possible. That said, remember that y'all yet need to be gentle, going with the flow of the butt instead of forcing it down.^[7]

8. 8

   Remove the sock and make clean the cage and rear cylinder. If you lot don't accept a cleaning kit, a rag or toothbrush with some cleaning solvent will be perfect. Lightly scrub away the outside of the revolver -- hitting the in and exterior of the cylinders, the trigger, the muzzle, and rear cylinder. Pull the extractor rod out of the center of the cylinder and clean that out as well.

9. ix

   Use your bore castor and some solvent to clean upwardly and downwards each cylinder. Push button all the way through, then pull the bore castor dorsum. Make sure you become through all the way, taking your time. Hold the gun and then that information technology rests on the cage, assuasive the solvent to drip harmlessly to the flooring. Add a little more solvent for each cylinder.^[eight]

10. 10

    Utilize the cleaning patches -- 1 with solvent, 2-3 dry -- to make clean the cylinders just like the butt. Remember to supervene upon them, and use actress patches if they still come out muddied. When done, make sure your unlubricated patches get everything dry.

11. 11

    Put a minor corporeality of gun oil on a clean cloth and wipe downwardly all metal surfaces. Rub downwardly the entire outside of the gun with a small amount of gun oil. Avoid the hand grips as well equally inside the barrels and cylinders. Wipe in small circles, adding more than oil when necessary.^[9]

12. 12

    Wipe off all excess oil with some other clean rag. Y'all desire it to be shiny, non oily or greasy. When done, you tin can finish the cleaning with a silicone gun cloth, which will leave the rifle as shiny as new.^[10]

    Advertisement

Add New Question

• Question

  I constitute a revolver; how can I observe out the caliber?

  

  It should say the caliber on the butt of the gun, or y'all tin Google it past typing in the details of the gun you lot found.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

Video

Things You'll Demand

• Revolver
• Diameter brushes
• Gun cleaning patches
• Gun Solvent
• Gun oil
• 2-3 Clean rags
• Silicon gun rag

• Some solvents should non be mixed, though you can practice this occasionally. For example, Hoppes #9 is a bang-up pulverization and pulverization residue solvent, but it is non designed for copper or atomic number 82. Sugariness's vii.62 Bore Solvent is useful for copper. If y'all intend to utilise more than ane solvent on the aforementioned firearm on the same cleaning, check with your gun dealer, or be sure to remove all the remainder of 1 before using another.

• Cleaning a pistol or revolver can be achieved with very few pieces of equipment. An "Outer's" kit has more than than everything y'all need. The solvents and oils make a mess and so a designated expanse the size of a carte du jour table and covered with butcher's paper and an old one colour bed sheet are nearly perfect. Cheap ammunition, like inexpensive gasoline, gets things dirty more quickly. Powder and lead residue require solvents to deliquesce build upwardly.

Thanks for submitting a tip for review!

Advertisement

• Always go on the gun pointed in a rubber direction, even when y'all don't call back information technology is loaded

• There is not a safety on your revolver, so do not put your finger on the trigger unless yous are ready to fire.

• Never handle any firearm when impaired due to drugs, alcohol, sedatives or pain medication, or when not completely mentally alert and of sound listen and thinking.

• Always presume the gun is loaded unless y'all have just inspected information technology.

Advertizement

About This Article

Thank you to all authors for creating a folio that has been read 99,831 times.

Did this article help you?

Source: https://www.wikihow.com/Clean-a-Revolver

Posted by: flavinberighbour.blogspot.com

Share this post